News
New Kingfisher firmware,software and updates from Servelec Technologies
Posted by Semaphore Support on 10 June 2015 04:58 AM

New Kingfisher firmware and software

CP-30/MC-31 Firmware 4165  - Feature Release

Kingfisher CP-30/MC-31 firmware version 4165 is now available for download from our Helpdesk here - Firmware 4165

Major features include

  • Linux kernel upgrade from 2.2.8 to 3.14.25. This brings the CP-30 in line with recent versions of linux kernels and also in future use the latest security patches of the new kernel.
  • Local time zone support
  • Send SMS messages via various Ethernet Routers
  • New Power Status Function Blocks
  • New SNMP Get Bulk and SNMP Set Value function blocks
  • Support for NTP on all ethernet ports ( including MC-31)
  • New diagnostics in the Service log reports to show start up cause and low battery on start-up condition and information added for diagnosis
  • Single restart of CP-30 when firmware is upgraded ( instead of previously a three part process)
  • This release removes support for G-30 based RTUs. Please note that Servelec Technologies will continue to provide full support for existing G-30 based RTU installations.
  • Various bug fixes. Please refer to release notes for full details

Toolbox PLUS 4.1.0 Feature Release

Toolbox PLUS 4.1.0 is now available for download from our Helpdesk here - Toolbox PLUS 4.1.0

Highlights of this release include:

  • Local time zone on the RTU
  • Send SMS messages via various Ethernet Routers
  • New Power Status Function Blocks
  • New SNMP Get Bulk and SNMP Set Value function blocks
  • New F64PACK/ F64UNPACK function blocks
  • Support for IsaGRAF debugging via T3 ports (without the need to change the project)
  • NTP Support on all ethernet ports ( including MC-31)
  • Configurable Modbus Port number
  • Updates to helpfile
  • Various bug fixes. Please refer to release notes for full details
  • Please note that Windows XP is no longer supported and this version of Toolbox Plus will not run on Windows XP
  • This release removes support for G-30 based RTUs. Please note that Servelec Technologies will continue to provide full support for existing G-30 based RTU installations.

CP-12/MC-12/LP-3 Firmware for various bug fixes

  • Kingfisher CP-12 firmware version 1.48c is now available for download from this link - CP-12 1.48e
  • Kingfisher MC-12 firmware version 113 is now available for download from this link - MC-12 116
  • Kingfisher LP-2/3 firmware version 1.52c is now available for download from this link - LP-2/3 1.52c

Product Updates

  • PC-1 processor end of production notice. Please see here for a detailed announcement
  • Kingfisher RTU operating temperature range has increased to -40 C to + 85 C. Please see here for a detailed announcement
  • Option I2 dual serial cards will be available for order from September 2016

Knowledgebase articles and application notes

Did you know ?

  • We have established a new online repair portal for return/repairs. This portal replaces the RA forms which are phased out of use. Please go to http://ra.servelec-semaphore.com to sign in to the portal.
  • If you want a specific version of firmware or driver on Kingfisher products, please specify the version number required on the purchase order. Otherwise, all Kingfisher products are shipped with the latest production versions
  • For any training needs please send us an email at info.australia@servelec-technologies.com or info.belgium@servelec-technologies.com
  • Tickets or issues can be raised by directly on our helpdesk by sending an email to support@servelec-technologies.com
  • Our helpdesk is at http://helpdesk.servelec-technologies.com . You will need to register on the helpdesk to get access to the various download areas. Once logged on to the helpdesk, you can use keywords to search for relevant knowledgebase articles to self diagnose problems or to access application notes.
  • Toolbox32 is now supported on Windows 10 operating system